choose your product
- hydraulic pipe bender
- hydraulic busbar tool
- Hydraulic knockout punch kits
- hydraulic crimping tool
- hydraulic cutting wire and steel
- hydraulic puller
- hydraulic cylinder
- hydraulic pump
- pressure testing pumps
- hydraulic flange spreaders and nut splitter
- hydraulic track jack
- Cargo Trolley
- hydraulic torque
- Electro-Hydraulic Rebar Cutters
- Wire rope pulling hoist
- Magnetic lifter
- Hydraulic Bolt Tensioner
- ติดต่อเรา
INDUCTION BEARING HEATS,ตัวให้ความร้อมตลับแบริ่ง
Feature
It is widely applied in the heating design manufacture installation repair service and various kinds of circumstances integration design safe reliable and eas to operate
Fast temperature setting, sound signal, temperature display ,overheat protection ,automatic keeping warm.
คลิกเพื่อดู VDO ว่า INDUCTION BEARING HEATS มีความจำเป็นอย่างไร
Feature
UMH-60 High Performance Heater Plate, suitable for heating Mini Bearing and abnormal work pieces.
Specification | |
Model | UMH-60 |
Voltage/current v. | 220 v. |
Power rating | 1300 W |
Frequency | 50/60 Hz |
Temperature Cotrol | 60 – 250 ̊c |
Control precision | ± 3 ̊c |
The fluctuant temperture of panel | ± 7 ̊c |
Panel dimension mm. | 390 x 190 mm. |
Figure dimension mm. | ̊̊400x220x145 mm. |
ราคา | 69,000 บาท |
Feature *
Manual/automatic demagnetization * Time display switch on temperature mode. * Induction coil outside the heater’s housing allows shorter heating time and lower energy consumption * Easy-to-operate control panel and LCD display * Equiped with suitable portable case
Specification | |
Model | UMH-100 |
Voltage/current v. | 220 v. / 10 A |
Power rating | 2.5 KVA |
Frequency | 50/60 Hz |
Min bore diameter of work piece (Vertical/horizontal) mm | 15 / 60 mm. |
Max.O.D of Work Piece mm | 220 mm. |
Max width of work Piece (Vertical/horizontal) | 65 / 95 mm. |
Max weight of bearing / other parts | 12 / 9 kg |
Max. temperature approx | 150 ̊c |
Mass Heater body Incl.Yokes | ̶ 18 kg |
Figure dimension mm. | 240x200x235 |
ราคา | 114,000 บาท |
Accessories free | |
Standard yoke | Min bore diameter of work piece |
11x10x150 | 20 mm |
14x14x150 | 30 mm |
20x200x150 | 45 mm |
30x30x150 | 65 mm |
40x40x150 | 60 mm |
Feature *
- Plastic molded heater body design
- * Adjust output power automatically/ manually :
- * Current overload /overheat Protection
- * Manually adjustable output power (2 levers)
- * Manual/automatic demagnetization
- * Time display switch on temperature mode
- * Powerful design for demanding industrial application
- * Maximum capacity for both work piece size and heating capacity
- * Data hold function
Specification | |
Model | UMH-200N |
Voltage/current v. | 220 v /16 A |
Power rating | 3.6 kva |
Frequency | 50/60 Hz |
Min bore diameter of work piece (Vertical/horizontal) mm | 20 mm. / 120 mm. |
Max.O.D of Work Piece mm | 480 mm. |
Max width of work Piece (Vertical/horizontal) | 130 mm / 195 mm. |
Max weight of bearing / other parts | 50 / 35 kg |
Max. temperature approx | 240 ̊c |
Mass Heater body Incl.Yokes | 29 kg |
Figure dimension mm. | 508 x 307 x 340 mm. |
ราคา | 156,000บาท |
Accessories free | |
Standard yoke | Min bore diameter of work piece |
14x14x250 | 20 mm |
20x20x250 | 30 mm |
30x30x250 | 45 mm |
45x45x250 | 65 mm |
- Adjust output power automatically/manually
- * Current overload /over heat Protection
- * Manually adjustable output power (2 levers)
- * Manual/automatic demagnetization
- * Time display switch on temperature mode
- * Data hold function
Specification | |
Model | UMH-220D |
Voltage/current v. | 220 v. / 25 A |
Power rating | 5.5 KVA |
Frequency | 50/60 Hz |
Min bore diameter of work piece (Vertical/horizontal) mm | 20 / 80 mm. |
Max.O.D of Work Piece mm | 510 mm. |
Max width of work Piece (Vertical/horizontal) | 165 / 220 mm. |
Max weight of bearing / other parts | 65 / 45 kg |
Max. temperature approx | 240 ̊c |
Mass Heater body Incl.Yokes | ̶ 56 kg |
Figure dimension mm. | 550x320x410 |
ราคา | 216,000 บาท |
Accessories free | |
Standard yoke | Min bore diameter of work piece |
14x14x280 | 20 mm |
20x20x280 | 30 mm |
30x30x280 | 45 mm |
40x40x280 | 60 mm |
55x55x280 | 80 mm |
- Feature
- * Manual/automatic demagnetization
- * Time display switch on temperature mode
- * Powerful design for demanding industrial application
- * Maximum capacity for both work piece size and heating capacity
- * Swing arm yokes design
Specification | |
Model | UMH-3800N |
Voltage/current v. | 400/30 A |
Power rating | 12 kva |
Frequency | 50/60 Hz |
Min bore diameter of work piece (Vertical/horizontal) mm | 60/180 mm. |
Max.O.D of Work Piece mm | 1020 mm. |
Max width of work Piece (Vertical/horizontal) | 375/315 mm. |
Max weight of bearing / other parts | 600/450 kg |
Max. temperature approx | 240 ̊c |
Mass Heater body Incl.Yokes | 300 kg |
Figure dimension mm. | 1460x700x1100 mm |
Accessories free | |
Standard yoke | Min bore diameter of work piece |
40x40x600 | 60 mm |
60x60x600 | 85 mm |
85x85x600 | 1255 mm |
ต้องการสอบถามรายละเอียดสินค้าหรือใบเสนอราคา
HOT LINE : คุณวรกิจ 08 1351 2376 , คุณไชยวัฒน์ 08 4709 8121
เชิญกรอกข้อมูลเพื่อขอรับส่วนลดพิเศษครับ กรุณาระบุ เขต และจังหวัดด้วยครับ
*การรับประกันสินค้า *รับประกันสินค้าเป็นเวลา 1 ปี*
บริการพิเศษ
1.มีบริการสาธิตก่อนการใช้งาน(ในเขตกรุงเทพฯและปริมณฑล)
การชำระเงิน
1.ชำระเงินสด
2.โอนเงิน ผ่านธนาคาร ท่านสามารถดูรายชื่อธนาคารจากหน้า “ชำระเงิน”
การส่งสินค้า
1.กรุงเทพฯและปริมณฑล จัดส่งฟรีภายใน 1-3 วัน ทำการ
2.ต่างจังหวัดฝากขนส่งตามจังหวัดต่างๆ เก็บเงินปลายทาง
3.ส่ง ทางพัสดุไปรษณีย์ ผู้ซื้อจ่ายค่าขนส่ง(เมื่อส่งแล้วท่านสามารถตรวจสอบสถานะการเดินทางของพัสดุ ได้จากโปรแกรม Track&Trace ของไปรษณีย์ ว่าปัจจุบันเดินทางไปถึงไหนแล้วเว็บไซท์ทางด้านซ้าย
ฮีตเตอร์,ฮีตเตอร์ไฟฟ้า,ฮีตเตอร์อุตสาหกรรม,ฮีตเตอร์แบริ่ง,ฮีตเตอร์ลูกปืน,ฮีตเตอร์ตลับลูกปืน,เครื่องทำความร้อนตลับลูกปืน,ถาดทำความร้อนตลับลูกปืน,เครื่องทำความร้อนแบริ่ง,ถาดทำความร้อนแบริ่ง,เครื่องทำความร้อนลูกปืน,ถาดทำความร้อนลูกปืน,Heater,Bearing Heater, Induction Heater,Induction Bearing Heater, Bearing Induction Heater, Heaters,Bearing Heaters, Induction Heaters,Induction Bearing Heaters,Bearing Induction Heaters,